|
UltraCruiser Plans Modifications
December 2003
NOTE: Page numbers reference
the current (revised) plans, page numbers
may vary slightly for plans purchased prior to August
2002.
On page 6 of the plans take
note of the following revision:
On the outer spar, the overall
dimension shown on top as 94 3/16" should be 94".
Note: This is needed in order to get the 4.125" (2.5º) distance for the
dihedral. There needs to be a 3/8" difference between the top and bottom
spars for each wing to get the dihedral. The 3/8" is then split between
the center section and the outer wing (3/16" each).
Back to update list
Home | About Us
| Hummel Bird |
Ultra Cruiser |
Ultra Cruiser Plus |
CA-2
Forums |
Newsletter | Our Store
| Contact Us
Copyright 2006, © All Rights Reserved,
Hummel Aviation, Bryan, Oh. |
