Register  |  FAQ  |  Search  |  Memberlist  |  Usergroups  |  Gallery  |  Log in 
 Home Page  |  Hummel Bird  |  Ultra Cruiser  |  Ultra Cruiser Plus  |  CA-2  |  About Us  |  Newsletter  |  Our Store  |  Contact Us 
Reply to topic
 Re: Which way up for Pistons and conrods 
mark at jenmarkcompute...
Guest

Reply with quote
Thanks for the quick reply Scott,

Mark


--- In HalfVw_Engines@yahoogroups.com, Scott Casler <humeng@...> wrote:

Hi Mark

It doesn't matter which cylinder is number 1, usually it it the left
side
facing the prop hub.
Front of engine is prop side.Tab goes up on rods. Arrow on pistons
goes
toward rear of engine.All internals of the Mosler are standard VW.

Scott


On Wed, Jan 27, 2010 at 12:34 PM, Mark mark@... wrote:



Hi everyone,
I need some help, after reading a lot of manuals on VW's
(unfortunately
none on the Mosler 1/2 VW)and talking to a few experts..For a
Tractor
setup....
Which is No.1 Cylinder (from the Pilots seat)?
Is the front of the engine the Prop Side?
The Conrods are offset so which way to the tabs go up or down?
Which way should the arrows (>) on the cylinders point - to the prop
or
to the pilot.?
Is there a rebuild manual available for the Mosler?
Thanks Mark

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
All times are GMT - 5 Hours  
Page 1 of 1  

  
  
 Reply to topic  

Home | About Us | Hummel Bird | Ultra Cruiser | Ultra Cruiser Plus | CA-2

Forums | Newsletter | Our Store | Contact Us

Copyright 2006, © All Rights Reserved, Hummel Aviation, Bryan, Oh.

Website maintenance provided by Bobbybee.Com